The CMLB series is Cyntec's molded power choke family 128 part numbers across 12 footprints, from 4.75*4.45 up to 17.5*17.15 mm. Every value shares the same metal-alloy dust core and molded body, so a design can stay inside one family as current and board-space needs change.
Inductance runs 0.1 to 150 µH. DC resistance drops as low as 0.45 mΩ, and saturation current reaches 76 A at 25 °C. Heights start at a 1.2 mm low profile for slim boards and top out at 7.0 mm for high-current rails engineers trade height for current without switching suppliers or re-qualifying a new core material.
The molded, magnetically shielded construction cuts EMI and audible coil noise, and holds up to standard SMT reflow. Parts are rated for high-frequency switching, and backed by Cyntec's parametric search, power-loss calculator and SPICE models.
Typical applications are VRM and multi-phase regulators for AI servers and switches, DC/DC converters in notebooks, point-of-load modules for network equipment.

The CMLB041B series from Cyntec is a family of 4.4 × 4.2 mm molded surface-mount power chokes built around a metal dust core. With a max profile of 1.2 mm and eight inductance values from 0.47 µH to 8.2 µH, it gives design engineers one part family for notebook CPU rails, exchanger POL modules, and server VRMs.

A high-saturation metal-alloy core pairs with a low-DCR winding. DC resistance stays below 480 mΩ across the range; saturation current reaches 7.4 A typical on the 0.47 µH value and still holds 1.9 A typical on the 8.2 µH value. Heat-rated current is defined as the DC bias that raises part temperature by 40 °C, so every value is sized for continuous conduction, not just pulsed conditions.
Cyntec rates the device for −55 °C to +125 °C operation, supports switching up to 1 MHz, and ships in a 100 % Pb-free RoHS-compliant molded body on tape-and-reel for high-speed SMT lines.
Typical applications are DC/DC converters for CPU cores in notebooks, on-board power supply modul

Cyntec HBLE/HBME/HBLQ/HBMQ series surface-mount power choke coils feature a low-profile metal dust core delivering ultra-low DCR, high saturation current (Isat), and minimal power loss. Ideal for DC-DC converters, laptop CPU VRMs, and high-density server power modules, these RoHS-compliant SMD inductors ensure high efficiency in compact electronics.

CYNTEC HMLE series SMD power inductors feature compact designs, low DCR and high saturation current performance for efficient power conversion. These power choke coils are widely used in DC/DC converters, CPU power supplies, server VRM, and compact electronic power systems.

CYNTEC HMLE series SMD power inductors feature compact designs, low DCR and high saturation current performance for efficient power conversion. These power choke coils are widely used in DC/DC converters, CPU power supplies, server VRM, and compact electronic power systems.